Configurator Credentials

You can configure new ARM Configurator credentials to be used for communications between:

■

Node - ARM Configurator

and

■

ARM Router - ARM Configurator

➢

To configure new credentials:

1.

Open the Configurator Credentials page (Settings > Administration > Configurator Credentials).

Configurator Credentials

2.

Click the add icon +.

Add Credentials - Device

●

If you're configuring credentials for Node - ARM Configurator communications, then from the 'Type' drop-down select Device as shown in the preceding figure.

●

If you're configuring credentials for ARM Router - ARM Configurator communications, then from the 'Type' drop-down select Router.

3.

Configure the fields using the table as reference.

Add Credentials - Device | Router

Setting	Description
User name	Enter the user name.
Password	Enter the password.
Password confirm	Re-enter the password.
Type	■ If you're configuring credentials for Node - ARM Configurator communications, select Device. ■ If you're configuring credentials for ARM Router - ARM Configurator communications, select Router.

4.

Click OK.

5.

[Optionally] Apply one of the previously defined settings to a specific

●

Node (or use the default Node): Open the Edit Node screen (Network > Map > <right-click the node> > Edit) and expand ‘Credentials’.

Edit Node

[The same applies to ‘Add Node’ and ‘Offline Planner’]

●

Router: Open the Routing Servers page (Settings > Routing Servers), click the add + or the edit icon for the specific ARM Routing Server, and then expand ‘Credentials’.

After applying newly configured ARM Configurator credentials to a specific Node, view the Node automatically displayed in the ‘Configurator credentials’ page in the ‘Used in Elements’ column, shown previously.

After applying newly configured ARM Configurator credentials to a specific Router, view the Router automatically displayed in the ‘Configurator credentials’ page in the appropriate ‘Used in Elements’ column, shown previously.